In a separate move, the U.S. Environmental Protection Agency (EPA) also gave its approval for the state to advance its Heavy-Duty Omnibus Rule, which is crafted to significantly reduce smog-forming nitrogen oxide (NOx) emissions from new heavy-duty, diesel-powered trucks.
Both rules are intended to deliver health benefits to California citizens affected by vehicle pollution, according to the environmental group Earthjustice. If they pass the remaining requirements to become law, the rules mean that cars on the road in California will largely be zero-emissions a generation from now in the 2050s, accounting for the average vehicle lifespan of vehicles with internal combustion engine (ICE) power sold before that 2035 date.
“This might read like checking a bureaucratic box, but EPA’s approval is a critical step forward in protecting our lungs from pollution and our wallets from the expenses of combustion fuels,” Paul Cort, director of Earthjustice’s Right To Zero campaign, said in a release. “The gradual shift in car sales to zero-emissions models will cut smog and household costs while growing California’s clean energy workforce. Cutting truck pollution will help clear our skies of smog. EPA should now approve the remaining authorization requests from California to allow the state to clean its air and protect its residents.”
However, the truck drivers' industry group Owner-Operator Independent Drivers Association (OOIDA) pushed back against the federal decision allowing the Omnibus Low-NOx rule to advance. "The Omnibus Low-NOx waiver for California calls into question the policymaking process under the Biden administration's EPA. Purposefully injecting uncertainty into a $588 billion American industry is bad for our economy and makes no meaningful progress towards purported environmental goals," (OOIDA) President Todd Spencer said in a release. "EPA's credibility outside of radical environmental circles would have been better served by working with regulated industries rather than ramming through last-minute special interest favors. We look forward to working with the Trump administration's EPA in good faith towards achievable environmental outcomes.”
Editor's note:This article was revised on December 18 to add reaction from OOIDA.
Global forklift sales have slumped in 2024, falling short of initial forecasts as a result of the struggling economy in Europe and the slow release of project funding in the U.S., a report from market analyst firm Interact Analysis says.
In response, the London-based firm has reduced its shipment forecast for the year to rise just 0.3%, although it still predicts consistent growth of around 4-5% out to 2034.
The “bleak” figures come as the European economy has stagnated during the second half of 2024, with two of the leading industry sectors for forklifts - automotive and logistics – struggling. In addition, order backlogs from the pandemic have now been absorbed, so order volumes for the global forklift market will be slightly lower than shipment volumes over the next few years, Interact Analysis said.
On a more positive note, 3 million forklifts are forecast to be shipped per year by 2031 as enterprises are forced to reduce their dependence on manual labor. Interact Analysis has observed that major forklift OEMs are continuing with their long-term expansion plans, while other manufacturers that are affected by demand fluctuations are much more cautious with spending on automation projects.
At the same time, the forklift market is seeing a fundamental shift in power sources, with demand for Li-ion battery-powered forklifts showing a growth rate of over 10% while internal combustion engine (ICE) demand shrank by 1% and lead-acid battery-powered forklift fell 7%.
And according to Interact Analysis, those trends will continue, with the report predicting that ICE annual market demand will shrink over 20% from 670,000 units in 2024 to a projected 500,000 units by 2034. And by 2034, Interact Analysis predicts 81% of fully electric forklifts will be powered by li-ion batteries.
The reasons driving that shift include a move in Europe to cleaner alternatives to comply with environmental policies, and a swing in the primary customer base for forklifts from manufacturing to logistics and warehousing, due to the rise of e-commerce. Electric forklift demand is also growing in emerging markets, but for different reasons—labor costs are creating a growing need for automation in factories, especially in China, India, and Eastern Europe. And since lithium-ion battery production is primarily based in Asia, the average cost of equipping forklifts with li-ion batteries is much lower than the rest of the world.
Companies in every sector are converting assets from fossil fuel to electric power in their push to reach net-zero energy targets and to reduce costs along the way, but to truly accelerate those efforts, they also need to improve electric energy efficiency, according to a study from technology consulting firm ABI Research.
In fact, boosting that efficiency could contribute fully 25% of the emissions reductions needed to reach net zero. And the pursuit of that goal will drive aggregated global investments in energy efficiency technologies to grow from $106 Billion in 2024 to $153 Billion in 2030, ABI said today in a report titled “The Role of Energy Efficiency in Reaching Net Zero Targets for Enterprises and Industries.”
ABI’s report divided the range of energy-efficiency-enhancing technologies and equipment into three industrial categories:
Commercial Buildings – Network Lighting Control (NLC) and occupancy sensing for automated lighting and heating; Artificial Intelligence (AI)-based energy management; heat-pumps and energy-efficient HVAC equipment; insulation technologies
Manufacturing Plants – Energy digital twins, factory automation, manufacturing process design and optimization software (PLM, MES, simulation); Electric Arc Furnaces (EAFs); energy efficient electric motors (compressors, fans, pumps)
“Both the International Energy Agency (IEA) and the United Nations Climate Change Conference (COP) continue to insist on the importance of energy efficiency,” Dominique Bonte, VP of End Markets and Verticals at ABI Research, said in a release. “At COP 29 in Dubai, it was agreed to commit to collectively double the global average annual rate of energy efficiency improvements from around 2% to over 4% every year until 2030, following recommendations from the IEA. This complements the EU’s Energy Efficiency First (EE1) Framework and the U.S. 2022 Inflation Reduction Act in which US$86 billion was earmarked for energy efficiency actions.”
ONE commissioned its Alternative Marine Power (AMP) container at Ningbo Zhoushan Port Group (NZPG)’s terminal in China on December 4.
ONE has deployed similar devices for nearly a decade on the U.S. West Coast, but the trial marked the first time a vessel at a Chinese port used shore power through Lift-on/Lift-off operations of an AMP container, a proven approach to boosting cold ironing and reducing emissions while in port, ONE said.
“One approach to reduce carbon footprint is through shore power usage,” ONE Global Chief Officer, Hiroki Tsujii, said in a release. “Today we will introduce the utilization of a containerized AMP unit to support further reduction. The use of an AMP unit is a familiar and effective approach within this industry. To be successful, close cooperation among various concerned parties is necessary. We believe this will contribute to carbon footprint reduction in a practical and expedited way, and we hope it is a good symbol of collaboration among relevant parties.”
ONE provides container shipping services to over 120 countries through its fleet of over 240 vessels with a capacity exceeding 1.9 million TEUs. The company says it is committed to exploring innovative solutions to reduce its environmental impact, support the adoption of sustainable port operations, and contribute to a greener future for all.
The Dutch ship building company Concordia Damen has worked with four partner firms to build two specialized vessels that will serve the offshore wind industry by transporting large, and ever growing, wind turbine components, the company said today.
The first ship, Rotra Horizon, launched yesterday at Jiangsu Zhenjiang Shipyard, and its sister ship, Rotra Futura, is expected to be delivered to client Amasus in 2025. The project involved a five-way collaboration between Concordia Damen and Amasus, deugro Danmark, Siemens Gamesa, and DEKC Maritime.
The design of the 550-foot Rotra Futura and Rotra Horizon builds on the previous vessels Rotra Mare and Rotra Vente, which were also developed by Concordia Damen, and have been operating since 2016. However, the new vessels are equipped for the latest generation of wind turbine components, which are becoming larger and heavier. They can handle that increased load with a Roll-On/Roll-Off (RO/RO) design, specialized ramps, and three Liebherr cranes, allowing turbine blades to be stowed in three tiers, providing greater flexibility in loading methods and cargo configurations.
“For the Rotra Futura and Rotra Horizon, we, along with our partners, have focused extensively on energy savings and an environmentally friendly design,” Concordia Damen Managing Director Chris Kornet said in a release. “The aerodynamic and hydro-optimized hull design, combined with a special low-resistance coating, contributes to lower fuel consumption. Furthermore, the vessels are equipped with an advanced Wärtsilä main engine, which consumes 15 percent less fuel and has a smaller CO₂ emission footprint than current standards.”
Supply chain risk analytics company Everstream Analytics has launched a product that can quantify the impact of leading climate indicators and project how identified risk will impact customer supply chains.
Expanding upon the weather and climate intelligence Everstream already provides, the new “Climate Risk Scores” tool enables clients to apply eight climate indicator risk projection scores to their facilities and supplier locations to forecast future climate risk and support business continuity.
The tool leverages data from the United Nations’ Intergovernmental Panel on Climate Change (IPCC) to project scores to varying locations using those eight category indicators: tropical cyclone, river flood, sea level rise, heat, fire weather, cold, drought and precipitation.
The Climate Risk Scores capability provides indicator risk projections for key natural disaster and weather risks into 2040, 2050 and 2100, offering several forecast scenarios at each juncture. The proactive planning tool can apply these insights to an organization’s systems via APIs, to directly incorporate climate projections and risk severity levels into your action systems for smarter decisions. Climate Risk scores offer insights into how these new operations may be affected, allowing organizations to make informed decisions and mitigate risks proactively.
“As temperatures and extreme weather events around the world continue to rise, businesses can no longer ignore the impact of climate change on their operations and suppliers,” Jon Davis, Chief Meteorologist at Everstream Analytics, said in a release. “We’ve consulted with the world’s largest brands on the top risk indicators impacting their operations, and we’re thrilled to bring this industry-first capability into Explore to automate access for all our clients. With pathways ranging from low to high impact, this capability further enables organizations to grasp the full spectrum of potential outcomes in real-time, make informed decisions and proactively mitigate risks.”