That conclusion comes after three major supply chain potholes were paved over through last-minute negotiations with labor groups. First, labor and management at West Coast ports reached a tentative contract agreement in June; second, a 13-day port strike in western Canada that affected some U.S. retailers last month ended with a tentative agreement; and third, United Parcel Service and the Teamsters agreed on a tentative contract that avoided a potential August 1 strike.
The researchers noted that only the Canadian agreement is final—having been ratified Friday—while the others are still going through the process of being approved through votes by union members. But most analysts expect the other two to win approval as well.
“Port and package-delivery labor negotiations that threatened the supply chain at the beginning of the summer have been resolved and retailers are now focused on preparing for the all-important holiday season,” NRF Vice President for Supply Chain and Customs Policy Jonathan Gold said in a release. “There are always supply challenges to be faced but holiday merchandise is flowing into the country, and we expect to see a smooth shipping season ahead of the winter holiday shopping season.”
Hackett Associates Founder Ben Hackett said double-digit year-over-year decreases in cargo volume this year have come even though consumer spending and U.S. employment have increased. “Dollar figures for international trade show imports remain in a year-over-year decline and cargo volume shows the same,” Hackett said. “The discrepancy between rising growth in sales and declining cargo volumes is happening because retailers are working their way through inventory built up over the last 12 to 18 months. Cargo growth should resume as inventories are depleted.”
By the numbers, U.S. ports covered by Global Port Tracker handled 1.83 million twenty-foot equivalent units (TEUs) of containers in June, the latest month for which final numbers are available. That was down 5.2% from May and down 18.7% year over year. That brought the first half of 2023 to 10.5 million TEU, down 22% from the first half of 2022.
Ports have not yet reported July numbers, but Global Port Tracker projected the month at 1.91 million TEU, down 12.7% year over year. August is forecast at 2.03 million TEU, down 10.2% year over year but the first month since last October to reach 2 million TEU. September is forecast at 1.97 million TEU, down 3%; October at 1.99 million TEU, down 1%; November at 1.92 million TEU, up 8% for the first year-over-year increase since June 2022, and December also at 1.92 million TEU, up 10.7% year over year.
If the forecasts hold true, those numbers would bring 2023 to 22.3 million TEU, down 12.8% from last year. Imports for all of 2022 totaled 25.5 million TEU, down 1.2% from the annual record of 25.8 million TEU set in 2021.
The British logistics robot vendor Dexory this week said it has raised $80 million in venture funding to support an expansion of its artificial intelligence (AI) powered features, grow its global team, and accelerate the deployment of its autonomous robots.
A “significant focus” continues to be on expanding across the U.S. market, where Dexory is live with customers in seven states and last month opened a U.S. headquarters in Nashville. The Series B will also enhance development and production facilities at its UK headquarters, the firm said.
The “series B” funding round was led by DTCP, with participation from Latitude Ventures, Wave-X and Bootstrap Europe, along with existing investors Atomico, Lakestar, Capnamic, and several angels from the logistics industry. With the close of the round, Dexory has now raised $120 million over the past three years.
Dexory says its product, DexoryView, provides real-time visibility across warehouses of any size through its autonomous mobile robots and AI. The rolling bots use sensor and image data and continuous data collection to perform rapid warehouse scans and create digital twins of warehouse spaces, allowing for optimized performance and future scenario simulations.
Originally announced in September, the move will allow Deutsche Bahn to “fully focus on restructuring the rail infrastructure in Germany and providing climate-friendly passenger and freight transport operations in Germany and Europe,” Werner Gatzer, Chairman of the DB Supervisory Board, said in a release.
For its purchase price, DSV gains an organization with around 72,700 employees at over 1,850 locations. The new owner says it plans to investment around one billion euros in coming years to promote additional growth in German operations. Together, DSV and Schenker will have a combined workforce of approximately 147,000 employees in more than 90 countries, earning pro forma revenue of approximately $43.3 billion (based on 2023 numbers), DSV said.
After removing that unit, Deutsche Bahn retains its core business called the “Systemverbund Bahn,” which includes passenger transport activities in Germany, rail freight activities, operational service units, and railroad infrastructure companies. The DB Group, headquartered in Berlin, employs around 340,000 people.
“We have set clear goals to structurally modernize Deutsche Bahn in the areas of infrastructure, operations and profitability and focus on the core business. The proceeds from the sale will significantly reduce DB’s debt and thus make an important contribution to the financial stability of the DB Group. At the same time, DB Schenker will gain a strong strategic owner in DSV,” Deutsche Bahn CEO Richard Lutz said in a release.
Transportation industry veteran Anne Reinke will become president & CEO of trade group the Intermodal Association of North America (IANA) at the end of the year, stepping into the position from her previous post leading third party logistics (3PL) trade group the Transportation Intermediaries Association (TIA), both organizations said today.
Meanwhile, TIA today announced that insider Christopher Burroughs would fill Reinke’s shoes as president & CEO. Burroughs has been with TIA for 13 years, most recently as its vice president of Government Affairs for the past six years, during which time he oversaw all legislative and regulatory efforts before Congress and the federal agencies.
Before her four years leading TIA, Reinke spent two years as Deputy Assistant Secretary with the U.S. Department of Transportation and 16 years with CSX Corporation.
National nonprofit Wreaths Across America (WAA) kicked off its 2024 season this week with a call for volunteers. The group, which honors U.S. military veterans through a range of civic outreach programs, is seeking trucking companies and professional drivers to help deliver wreaths to cemeteries across the country for its annual wreath-laying ceremony, December 14.
“Wreaths Across America relies on the transportation industry to move the mission. The Honor Fleet, composed of dedicated carriers, professional drivers, and other transportation partners, guarantees the delivery of millions of sponsored veterans’ wreaths to their destination each year,” Courtney George, WAA’s director of trucking and industry relations, said in a statement Tuesday. “Transportation partners benefit from driver retention and recruitment, employee engagement, positive brand exposure, and the opportunity to give back to their community’s veterans and military families.”
WAA delivers wreaths to more than 4,500 locations nationwide, and as of this week had added more than 20 loads to be delivered this season. The wreaths are donated by sponsors from across the country, delivered by truckers, and laid at the graves of veterans by WAA volunteers.
Wreaths Across America
Transportation companies interested in joining the Honor Fleet can visit the WAA website to find an open lane or contact the WAA transportation team at trucking@wreathsacrossamerica.org for more information.
Krish Nathan is the Americas CEO for SDI Element Logic, a provider of turnkey automation solutions and sortation systems. Nathan joined SDI Industries in 2000 and honed his project management and engineering expertise in developing and delivering complex material handling solutions. In 2014, he was appointed CEO, and in 2022, he led the search for a strategic partner that could expand SDI’s capabilities. This culminated in the acquisition of SDI by Element Logic, with SDI becoming the Americas branch of the company.
A native of the U.K., Nathan received his bachelor’s degree in manufacturing engineering from Coventry University and has studied executive leadership at Cranfield University.
Q: How would you describe the current state of the supply chain industry?
A: We see the supply chain industry as very dynamic and exciting, both from a growth perspective and from an innovation perspective. The pandemic hangover is still impacting decisions to nearshore, and that has resulted in a spike in business for us in both the USA and Mexico. Adding new technology to our portfolio has been a significant contributor to our continued expansion.
Q: Distributors were making huge tech investments during the pandemic simply to keep up with soaring consumer demand. How have things changed since then?
A: The consumer demand for e-commerce certainly appears to have cooled since the pandemic high, but our clients continue to see steady growth. Growth, combined with low unemployment and high labor costs, continues to make automation a good investment for many companies.
Q: Robotics are still in high demand for material handling applications. What are some of the benefits of these systems?
A: As an organization, we are investing heavily in software that will allow Element Logic to offer solutions for robotic picking that are hardware-agnostic. We have had success deploying unit picking for order fulfillment solutions and unit placing of items onto tray-based sorters.
From a benefit point of view, we’ve seen the consistency of a given operation improve. For example, the placement accuracy of a product onto a tray is far higher from a robotic arm than from a person. In order fulfillment applications, two of the biggest benefits are reliability and hours of operation. The robots don't call in sick, and they are happy to work 22 hours a day!
Q: SDI Element Logic offers a wide range of automated solutions, including automated storage and sortation equipment. What criteria should distributors use to determine what type of system is right for them?
A: There are a significant number of factors to consider when thinking about automation. In my experience, automation pays for itself in three key ways: It saves space, it increases the efficiency of labor, and it improves accuracy. So evaluating which of these will be [most] beneficial and quantifying the associated savings will lead to a “right sized” investment in technology.
Another important factor to consider is product mix. With a small SKU (stock-keeping unit) base, often automation doesn’t make sense. And with a huge SKU base, there will be products that don’t lend themselves to automation.
With any significant investment, you need to partner with an organization that has deep experience with the technologies that are being considered and … in-depth knowledge of the process that is being automated.
Q: How can a goods-to-person system reduce the amount of labor needed to fill orders?
A: In most order picking operations, there is a considerable amount of walking between pick faces to find the SKUs associated with a given order or set of orders. Goods-to-person eliminates the walking and allows the operator to just pick. I have seen studies that [show] that 75% of the time [required] to assemble an order in a manual picking environment is walking or “non-picking” time. So eliminating walking will reduce the amount of labor needed.
The goods-to-person approach also fits perfectly with robotic picking, so even the actual picking aspect of order assembly can be automated in some instances. For these reasons, [automation offers] a significant opportunity to reduce the labor needed to fulfill a customer order.
Q: If you could pick one thing a company should do to improve its distribution center operations, what would it be?
A: Evaluate. Evaluate the opportunities for improving by considering automation. In my experience, the challenge most companies have is recognizing that automation is an alternative. The barrier to entry is far lower than most people think!