David Egan, head of industrial and logistics research for the Americas operation of real estate giant CBRE Group, says the future is looking up for industrial property, literally and figuratively.
Mark Solomon joined DC VELOCITY as senior editor in August 2008, and was promoted to his current position on January 1, 2015. He has spent more than 30 years in the transportation, logistics and supply chain management fields as a journalist and public relations professional. From 1989 to 1994, he worked in Washington as a reporter for the Journal of Commerce, covering the aviation and trucking industries, the Department of Transportation, Congress and the U.S. Supreme Court. Prior to that, he worked for Traffic World for seven years in a similar role. From 1994 to 2008, Mr. Solomon ran Media-Based Solutions, a public relations firm based in Atlanta. He graduated in 1978 with a B.A. in journalism from The American University in Washington, D.C.
The traditional warehouse and distribution center is a wide, squat structure sitting amid seemingly endless tracts of land at or near interstate highways or state roads. Those aren't going away, but a new type of warehouse design is muscling its way in: taller structures with a new focus on three-dimensional (3-D) measurement that captures the true extent of a building's available space.
In a report issued in late March, CBRE Group Inc. said the height of the typical U.S. warehouse had increased to 33 feet in 2016 from 24 feet in the 1960s. What's more, while 13.7 billion cubic feet of U.S. warehouse space was built from 2010 to 2016, that would be just 422.5 million square feet of space if the facilities were measured by ground-floor area. Driving the move upward is the rapid growth of e-commerce fulfillment networks that have led companies to install mezzanine levels to add more human pickers as well as a need to be closer to densely populated urban centers where land is in short supply, prohibitively expensive, or both.
David Egan, CBRE's head of industrial and logistics research for the Americas, recently spoke to Mark B. Solomon, executive editor-news, about the trend to build taller and to measure space through a 3-D prism, and how this evolution in design may spur the next phase of U.S. industrial property's multiyear success story.
Q: Industrial real estate has been on a multiyear tear. How long do you see this continuing?
A: With a growing domestic economy and e-commerce sector, demand in the near term is likely to persist. It should slow a bit from the very strong run it had from 2013-2015, but it still will be at, or above, long-run averages. The supply side, which has been somewhat slow during this cycle, is projected to deliver new product at, or slightly above, the rate of demand for the first time in nearly a decade. This will have the effect of pushing availability rates up a bit and slowing the rate of rental growth. Overall, the market is in a fairly mature state but still looks to be strong in the near term.
Q: What factors would slow the market down?
A: The two factors that would slow the market are a flat or shrinking U.S. GDP, and/or a significant slowdown in trade due to a slowing global economy or political pressures. However, both factors are mitigated to some degree by the continued buildout of the e-commerce supply chain. Both retailers and suppliers need more distribution locations to get as close as possible to the consumer. This growth is not as tied to the vagaries of the economy, and it is very likely to persist regardless of any change in the economy.
Q: The Federal Reserve is considering two, maybe three, more rate hikes in 2017. Will higher borrowing costs, which would increase inventory-carrying costs, inject friction into the industrial market?
A: Higher inventory costs are certainly an issue for supply chain players. However, the Fed's desire to raise rates would be in response to its current and future perceptions of a strong economy. A strong U.S. economy means a strong U.S. consumer who is buying things. The growth in consumption is accretive to the users of supply chain real estate. That should lead to further topline growth and mitigate the higher carrying costs that would come from higher rates.
Q: CBRE recently published a report on warehouse and DC development that predicted the future of building design will be vertical rather than horizontal, making the measurement of cubic feet, or the "third dimension," more important. Can you explain the significance of this design trend, and its impact on warehouse users and operators?
A: Modern fulfillment centers tend to have very large inventory counts and high throughput of small items in contrast to traditional warehouses, which move inventory in large batches on pallets. Modern fulfillment is very labor-intensive, so it is critical to design a warehouse where people can get access to the items in the racks. The most efficient design is to build taller warehouses for more volume, and then construct mezzanine levels on which people can walk and get access to racks 30 feet in the air. A 40-foot warehouse allows for three levels of mezzanine, which is the most efficient and cost-effective use of the entire building.
Q: E-commerce is clearly driving this, but you said the reason behind taller warehouses is that users could install more mezzanine levels to accommodate more pickers, not because it would be a more efficient use of urban space located close to many e-commerce end customers. Given this thinking, is it possible that we will see skyscraper-type warehouses dotting the rural landscapes where the traditional squat warehouses are located?
A: Skyscrapers? No. While the average warehouse height is creeping higher, it's important to note that the e-commerce user and XXL distribution centers still are a minority of the supply and demand in the market. The majority of the users are still somewhat traditional companies who adequately make use of smaller buildings.
Q: Will lower property costs be a side benefit of this trend because there will be less raw land needed?
A: Land requirements for these large buildings are not going down even as the heights go up. These types of facilities require excess land for parking for additional employees, for extra trailer storage, and to accommodate the extra truck traffic. The latter because there are more truck visits to these high-volume fulfillment centers than to regular warehouses. Savings on the costs of land is not really a feature of these buildings thus far.
Q: On another front, users that are being priced out of expensive coastal markets, as well as key inland commerce centers, are looking at less-expensive markets long considered second-tier. Is the country's transport and logistics infrastructure capable of supporting increasing demand in the nation's interior?
A: The inland port infrastructure is solid, but it has room for improvement. We have seen secondary markets such as Kansas City and Greenville/Spartanburg (S.C.) make investments in intermodal infrastructure and capture significant market share. As the major intermodal markets like Chicago and Dallas near capacity constraints, other smaller, yet well-located markets like Columbus, Ohio, have the opportunity to capture outsized growth with investment in inland port infrastructure, such as intermodal facilities and airports.
Q: What is the next frontier for industrial development? Is it geographic? Related to expansion of verticals?
A: The next interesting wave will be the addition of multilevel warehouses in the U.S. These are not warehouses with extra mezzanine levels. Rather, we're talking about cubes stacked on top of each other, where each level can accommodate trucks, and loading and unloading. This has been common for some time in dense Asian and European cities, and it will be necessary in dense, infill, land-constrained areas in the U.S. We are seeing the first wave of this in certain West Coast markets. We should see it rolling out more broadly in the next several years.
“The past year has been unprecedented, with extreme weather events, heightened geopolitical tension and cybercrime destabilizing supply chains throughout the world. Navigating this year’s looming risks to build a secure supply network has never been more critical,” Corey Rhodes, CEO of Everstream Analytics, said in the firm’s “2025 Annual Risk Report.”
“While some risks are unavoidable, early notice and swift action through a combination of planning, deep monitoring, and mitigation can save inventory and lives in 2025,” Rhodes said.
In its report, Everstream ranked the five categories by a “risk score metric” to help global supply chain leaders prioritize planning and mitigation efforts for coping with them. They include:
Drowning in Climate Change – 90% Risk Score. Driven by shifting climate patterns and record-high temperatures, extreme weather events are a dominant risk to the supply chain due to concerns such as flooding and elevated ocean temperatures.
Geopolitical Instability with Increased Tariff Risk – 80% Risk Score. These threats could disrupt trade networks and impact economies worldwide, including logistics, transportation, and manufacturing industries. The following major geopolitical events are likely to impact global trade: Red Sea disruptions, Russia-Ukraine conflict, Taiwan trade risks, Middle East tensions, South China Sea disputes, and proposed tariff increases.
More Backdoors for Cybercrime – 75% Risk Score. Supply chain leaders face escalating cybersecurity risks in 2025, driven by the growing reliance on AI and cloud computing within supply chains, the proliferation of IoT-connected devices, vulnerabilities in sub-tier supply chains, and a disproportionate impact on third-party logistics providers (3PLs) and the electronics industry.
Rare Metals and Minerals on Lockdown – 65% Risk Score. Between rising regulations, new tariffs, and long-term or exclusive contracts, rare minerals and metals will be harder than ever, and more expensive, to obtain.
Crackdown on Forced Labor – 60% Risk Score. A growing crackdown on forced labor across industries will increase pressure on companies who are facing scrutiny to manage and eliminate suppliers violating human rights. Anticipated risks in 2025 include a push for alternative suppliers, a cascade of legislation to address lax forced labor issues, challenges for agri-food products such as palm oil and vanilla.
That number is low compared to widespread unemployment in the transportation sector which reached its highest level during the COVID-19 pandemic at 15.7% in both May 2020 and July 2020. But it is slightly above the most recent pre-pandemic rate for the sector, which was 2.8% in December 2019, the BTS said.
For broader context, the nation’s overall unemployment rate for all sectors rose slightly in December, increasing 0.3 percentage points from December 2023 to 3.8%.
On a seasonally adjusted basis, employment in the transportation and warehousing sector rose to 6,630,200 people in December 2024 — up 0.1% from the previous month and up 1.7% from December 2023. Employment in transportation and warehousing grew 15.1% in December 2024 from the pre-pandemic December 2019 level of 5,760,300 people.
The largest portion of those workers was in warehousing and storage, followed by truck transportation, according to a breakout of the total figures into separate modes (seasonally adjusted):
Warehousing and storage rose to 1,770,300 in December 2024 — up 0.1% from the previous month and up 0.2% from December 2023.
Truck transportation fell to 1,545,900 in December 2024 — down 0.1% from the previous month and down 0.4% from December 2023.
Air transportation rose to 578,000 in December 2024 — up 0.4% from the previous month and up 1.4% from December 2023.
Transit and ground passenger transportation rose to 456,000 in December 2024 — up 0.3% from the previous month and up 5.7% from December 2023.
Rail transportation remained virtually unchanged in December 2024 at 150,300 from the previous month but down 1.8% from December 2023.
Water transportation rose to 74,300 in December 2024 — up 0.1% from the previous month and up 4.8% from December 2023.
Pipeline transportation rose to 55,000 in December 2024 — up 0.5% from the previous month and up 6.2% from December 2023.
The supply chain risk management firm Overhaul has landed $55 million in backing, saying the financing will fuel its advancements in artificial intelligence and support its strategic acquisition roadmap.
The equity funding round comes from the private equity firm Springcoast Partners, with follow-on participation from existing investors Edison Partners and Americo. As part of the investment, Springcoast’s Chris Dederick and Holger Staude will join Overhaul’s board of directors.
According to Austin, Texas-based Overhaul, the money comes as macroeconomic and global trade dynamics are driving consequential transformations in supply chains. That makes cargo visibility and proactive risk management essential tools as shippers manage new routes and suppliers.
“The supply chain technology space will see significant consolidation over the next 12 to 24 months,” Barry Conlon, CEO of Overhaul, said in a release. “Overhaul is well-positioned to establish itself as the ultimate integrated solution, delivering a comprehensive suite of tools for supply chain risk management, efficiency, and visibility under a single trusted platform.”
Shippers today are praising an 11th-hour contract agreement that has averted the threat of a strike by dockworkers at East and Gulf coast ports that could have frozen container imports and exports as soon as January 16.
The agreement came late last night between the International Longshoremen’s Association (ILA) representing some 45,000 workers and the United States Maritime Alliance (USMX) that includes the operators of port facilities up and down the coast.
Details of the new agreement on those issues have not yet been made public, but in the meantime, retailers and manufacturers are heaving sighs of relief that trade flows will continue.
“Providing certainty with a new contract and avoiding further disruptions is paramount to ensure retail goods arrive in a timely manner for consumers. The agreement will also pave the way for much-needed modernization efforts, which are essential for future growth at these ports and the overall resiliency of our nation’s supply chain,” Gold said.
The next step in the process is for both sides to ratify the tentative agreement, so negotiators have agreed to keep those details private in the meantime, according to identical statements released by the ILA and the USMX. In their joint statement, the groups called the six-year deal a “win-win,” saying: “This agreement protects current ILA jobs and establishes a framework for implementing technologies that will create more jobs while modernizing East and Gulf coasts ports – making them safer and more efficient, and creating the capacity they need to keep our supply chains strong. This is a win-win agreement that creates ILA jobs, supports American consumers and businesses, and keeps the American economy the key hub of the global marketplace.”
The breakthrough hints at broader supply chain trends, which will focus on the tension between operational efficiency and workforce job protection, not just at ports but across other sectors as well, according to a statement from Judah Levine, head of research at Freightos, a freight booking and payment platform. Port automation was the major sticking point leading up to this agreement, as the USMX pushed for technologies to make ports more efficient, while the ILA opposed automation or semi-automation that could threaten jobs.
"This is a six-year détente in the tech-versus-labor tug-of-war at U.S. ports," Levine said. “Automation remains a lightning rod—and likely one we’ll see in other industries—but this deal suggests a cautious path forward."
Editor's note: This story was revised on January 9 to include additional input from the ILA, USMX, and Freightos.
Under terms of the deal, Sick and Endress+Hauser will each hold 50% of a joint venture called "Endress+Hauser SICK GmbH+Co. KG," which will strengthen the development and production of analyzer and gas flow meter technologies. According to Sick, its gas flow meters make it possible to switch to low-emission and non-fossil energy sources, for example, and the process analyzers allow reliable monitoring of emissions.
As part of the partnership, the product solutions manufactured together will now be marketed by Endress+Hauser, allowing customers to use a broader product portfolio distributed from a single source via that company’s global sales centers.
Under terms of the contract between the two companies—which was signed in the summer of 2024— around 800 Sick employees located in 42 countries will transfer to Endress+Hauser, including workers in the global sales and service units of Sick’s “Cleaner Industries” division.
“This partnership is a perfect match,” Peter Selders, CEO of the Endress+Hauser Group, said in a release. “It creates new opportunities for growth and development, particularly in the sustainable transformation of the process industry. By joining forces, we offer added value to our customers. Our combined efforts will make us faster and ultimately more successful than if we acted alone. In this case, one and one equals more than two.”
According to Sick, the move means that its current customers will continue to find familiar Sick contacts available at Endress+Hauser for consulting, sales, and service of process automation solutions. The company says this approach allows it to focus on its core business of factory and logistics automation to meet global demand for automation and digitalization.
Sick says its core business has always been in factory and logistics automation, which accounts for more than 80% of sales, and this area remains unaffected by the new joint venture. In Sick’s view, automation is crucial for industrial companies to secure their productivity despite limited resources. And Sick’s sensor solutions are a critical part of industrial automation, which increases productivity through artificial intelligence and the digital networking of production and supply chains.