The long-suffering freight market may be in the initial steps of a gradual recovery as excess trucks and drivers finally begin to exit the market, according to a report from ACT Research.
That trend was shown by the December edition of ACT’s For-Hire Trucking Index, which showed the Supply-Demand Balance tightening by 2.2 points to 54.2, seasonally adjusted, from 52.0 in November.
Meanwhile, the report’s Capacity Index decreased by 3.3 points compared to November, to 44.2 in December. For-hire capacity has now contracted in seven of the past eight months, and decreased further as fleet purchase intentions cratered and driver availability fell further this month, the Columbus, Indiana-based transportation research firm said.
“With volumes stabilizing and capacity contracting, the for-hire Supply-Demand Balance has been signaling an impending increase in freight rates for a few months. Truckload spot rates are 12% above the seasonal pattern in January following the cold snap. While weather effects should revert in the coming months, freight is an outdoor sport, so the cycle will likely find a higher trajectory as the reversion happens amid tightening capacity and recovering demand,” Tim Denoyer, Vice President & Senior Analyst at ACT Research, said in a release.
Denoyer added, “Capacity is still being added industry wide by private fleets, but declining US Class 8 tractor sales indicate this phenomenon is starting to slow. Unlike private fleets, for-hire capacity has been contracting, so as private fleet additions decline, tighter industry capacity should press rates up.”
As a proof point, he said the Driver Availability Index had dropped noticeably, down 4.1 points since November to 50.9 in December.
“The quality fleets in our survey have been safe havens for owner operators for the past couple years, but market dynamics seem to have finally caught up with the driver market,” Denoyer said. “While bad news for the drivers, it’s key to tightening the freight market. While weather is the larger near-term factor, driver availability is a critical longer-term factor also starting to help press spot rates up.”
The Port of Oakland has been awarded $50 million from the U.S. Department of Transportation’s Maritime Administration (MARAD) to modernize wharves and terminal infrastructure at its Outer Harbor facility, the port said today.
Those upgrades would enable the Outer Harbor to accommodate Ultra Large Container Vessels (ULCVs), which are now a regular part of the shipping fleet calling on West Coast ports. Each of these ships has a handling capacity of up to 24,000 TEUs (20-foot containers) but are currently restricted at portions of Oakland’s Outer Harbor by aging wharves which were originally designed for smaller ships.
According to the port, those changes will let it handle newer, larger vessels, which are more efficient, cost effective, and environmentally cleaner to operate than older ships. Specific investments for the project will include: wharf strengthening, structural repairs, replacing container crane rails, adding support piles, strengthening support beams, and replacing electrical bus bar system to accommodate larger ship-to-shore cranes.
The Florida logistics technology startup OneRail has raised $42 million in venture backing to lift the fulfillment software company its next level of growth, the company said today.
The “series C” round was led by Los Angeles-based Aliment Capital, with additional participation from new investors eGateway Capital and Florida Opportunity Fund, as well as current investors Arsenal Growth Equity, Piva Capital, Bullpen Capital, Las Olas Venture Capital, Chicago Ventures, Gaingels and Mana Ventures. According to OneRail, the funding comes amidst a challenging funding environment where venture capital funding in the logistics sector has seen a 90% decline over the past two years.
The latest infusion follows the firm’s $33 million Series B round in 2022, and its move earlier in 2024 to acquire the Vancouver, Canada-based company Orderbot, a provider of enterprise inventory and distributed order management (DOM) software.
Orlando-based OneRail says its omnichannel fulfillment solution pairs its OmniPoint cloud software with a logistics as a service platform and a real-time, connected network of 12 million drivers. The firm says that its OmniPointsoftware automates fulfillment orchestration and last mile logistics, intelligently selecting the right place to fulfill inventory from, the right shipping mode, and the right carrier to optimize every order.
“This new funding round enables us to deepen our decision logic upstream in the order process to help solve some of the acute challenges facing retailers and wholesalers, such as order sourcing logic defaulting to closest store to customer to fulfill inventory from, which leads to split orders, out-of-stocks, or worse, cancelled orders,” OneRail Founder and CEO Bill Catania said in a release. “OneRail has revolutionized that process with a dynamic fulfillment solution that quickly finds available inventory in full, from an array of stores or warehouses within a localized radius of the customer, to meet the delivery promise, which ultimately transforms the end-customer experience.”
Commercial fleet operators are steadily increasing their use of GPS fleet tracking, in-cab video solutions, and predictive analytics, driven by rising costs, evolving regulations, and competitive pressures, according to an industry report from Verizon Connect.
Those conclusions come from the company’s fifth annual “Fleet Technology Trends Report,” conducted in partnership with Bobit Business Media, and based on responses from 543 fleet management professionals.
The study showed that for five consecutive years, at least four out of five respondents have reported using at least one form of fleet technology, said Atlanta-based Verizon Connect, which provides fleet and mobile workforce management software platforms, embedded OEM hardware, and a connected vehicle device called Hum by Verizon.
The most commonly used of those technologies is GPS fleet tracking, with 69% of fleets across industries reporting its use, the survey showed. Of those users, 72% find it extremely or very beneficial, citing improved efficiency (62%) and a reduction in harsh driving/speeding events (49%).
Respondents also reported a focus on safety, with 57% of respondents citing improved driver safety as a key benefit of GPS fleet tracking. And 68% of users said in-cab video solutions are extremely or very beneficial. Together, those technologies help reduce distracted driving incidents, improve coaching sessions, and help reduce accident and insurance costs, Verizon Connect said.
Looking at the future, fleet management software is evolving to meet emerging challenges, including sustainability and electrification, the company said. "The findings from this year's Fleet Technology Trends Report highlight a strong commitment across industries to embracing fleet technology, with GPS tracking and in-cab video solutions consistently delivering measurable results,” Peter Mitchell, General Manager, Verizon Connect, said in a release. “As fleets face rising costs and increased regulatory pressures, these technologies are proving to be indispensable in helping organizations optimize their operations, reduce expenses, and navigate the path toward a more sustainable future.”
Businesses engaged in international trade face three major supply chain hurdles as they head into 2025: the disruptions caused by Chinese New Year (CNY), the looming threat of potential tariffs on foreign-made products that could be imposed by the incoming Trump Administration, and the unresolved contract negotiations between the International Longshoremen’s Association (ILA) and the U.S. Maritime Alliance (USMX), according to an analysis from trucking and logistics provider Averitt.
Each of those factors could lead to significant shipping delays, production slowdowns, and increased costs, Averitt said.
First, Chinese New Year 2025 begins on January 29, prompting factories across China and other regions to shut down for weeks, typically causing production to halt and freight demand to skyrocket. The ripple effects can range from increased shipping costs to extended lead times, disrupting even the most well-planned operations. To prepare for that event, shippers should place orders early, build inventory buffers, secure freight space in advance, diversify shipping modes, and communicate with logistics providers, Averitt said.
Second, new or increased tariffs on foreign-made goods could drive up the cost of imports, disrupt established supply chains, and create uncertainty in the marketplace. In turn, shippers may face freight rate volatility and capacity constraints as businesses rush to stockpile inventory ahead of tariff deadlines. To navigate these challenges, shippers should prepare advance shipments and inventory stockpiling, diversity sourcing, negotiate supplier agreements, explore domestic production, and leverage financial strategies.
Third, unresolved contract negotiations between the ILA and the USMX will come to a head by January 15, when the current contract expires. Labor action or strikes could cause severe disruptions at East and Gulf Coast ports, triggering widespread delays and bottlenecks across the supply chain. To prepare for the worst, shippers should adopt a similar strategy to the other potential January threats: collaborate early, secure freight, diversify supply chains, and monitor policy changes.
According to Averitt, companies can cushion the impact of all three challenges by deploying a seamless, end-to-end solution covering the entire path from customs clearance to final-mile delivery. That strategy can help businesses to store inventory closer to their customers, mitigate delays, and reduce costs associated with supply chain disruptions. And combined with proactive communication and real-time visibility tools, the approach allows companies to maintain control and keep their supply chains resilient in the face of global uncertainties, Averitt said.
Specifically, the new global average robot density has reached a record 162 units per 10,000 employees in 2023, which is more than double the mark of 74 units measured seven years ago.
Broken into geographical regions, the European Union has a robot density of 219 units per 10,000 employees, an increase of 5.2%, with Germany, Sweden, Denmark and Slovenia in the global top ten. Next, North America’s robot density is 197 units per 10,000 employees – up 4.2%. And Asia has a robot density of 182 units per 10,000 persons employed in manufacturing - an increase of 7.6%. The economies of Korea, Singapore, mainland China and Japan are among the top ten most automated countries.
Broken into individual countries, the U.S. ranked in 10th place in 2023, with a robot density of 295 units. Higher up on the list, the top five are:
The Republic of Korea, with 1,012 robot units, showing a 5% increase on average each year since 2018 thanks to its strong electronics and automotive industries.
Singapore had 770 robot units, in part because it is a small country with a very low number of employees in the manufacturing industry, so it can reach a high robot density with a relatively small operational stock.
China took third place in 2023, surpassing Germany and Japan with a mark of 470 robot units as the nation has managed to double its robot density within four years.
Germany ranks fourth with 429 robot units for a 5% CAGR since 2018.
Japan is in fifth place with 419 robot units, showing growth of 7% on average each year from 2018 to 2023.