Skip to content
Search AI Powered

Latest Stories

Freight downcycle is closer to the end than the start, ACT says

Trucking freight volumes and rates declined again in February, but cycle should bottom out in the next couple of months, firm forecasts.

ACT Screen Shot 2023-03-27 at 12.00.54 PM.png

The trucking sector is closer to the end than to the start of its freight downcycle, according to an analysis of February’s freight volumes and rates from transportation research firm ACT Research.

Both volumes and rates declined in February, but the Columbus, Indiana-based firm forecasted that “rate trends should begin to recover as soon as traction on freight volumes is established, and slower capacity growth this month is a hopeful sign the bottoming process is closer, as fleets begin to respond to softer market conditions.”


The market has not turned the corner yet; ACT says that freight volumes in February remained soft amidst a market of mixed economic signals. The firm’s Trucking Volume Index was in contraction territory for the 8th month of the past 11 in February, at 41.3 (seasonally adjusted) compared to 51.6 in January. 

ACT’s Pricing Index also showed continued weakness, decreasing 6.3 points, to 39.3 in February (seasonally adjusted) from 45.6 in January, marking only the fourth time in the index’s history that prices have been in the thirties.

However, markets with extremely low prices tend to correct themselves by attracting more buyers, thus driving up demand and supporting price hikes, according to an analysis from Tim Denoyer, ACT’s vice president & senior analyst. “The cure for low prices is low prices, and we currently estimate spot rates are 16% below fleet operating costs, which should expedite this bottoming process. Even as freight demand fundamentals will likely remain soft, seasonal increases in [truckload] volumes as capacity slows and eventually tightens will build the bottom of the spot rate cycle in the next couple of months,” he said.

That analysis was reinforced by news today that shippers’ leverage over carriers had loosed slightly in January. Transportation analyst firm FTR said that its Shippers Conditions Index (SCI) fell in January to a reading of 5.4 from its December mark of 10.3.

However, FTR said that the January SCI was still the strongest since May 2020 and is forecast to remain stable into 2024. “The Shippers Conditions Index is likely to hold firm unless overall economic conditions deteriorate significantly from present levels. Looser truckload capacity, slowing imports, and improving rail service should all support stable to improving shippers’ conditions through the balance of the year,” Todd Tranausky, vice president of rail and intermodal at FTR, said in a release.

The index tracks the changes representing four major conditions in the U.S. full-load freight market: freight demand, freight rates, fleet capacity, and fuel price. Combined into a single number, the result shows good, optimistic conditions when positive and the opposite when negative.

 

 

The Latest

More Stories

legal scales and gavel

FMCSA rule would require greater broker transparency

A move by federal regulators to reinforce requirements for broker transparency in freight transactions is stirring debate among transportation groups, after the Federal Motor Carrier Safety Administration (FMCSA) published a “notice of proposed rulemaking” this week.

According to FMCSA, its draft rule would strive to make broker transparency more common, requiring greater sharing of the material information necessary for transportation industry parties to make informed business decisions and to support the efficient resolution of disputes.

Keep ReadingShow less

Featured

pickle robot unloading truck

Pickle Robot lands $50 million in VC for truck-unloading robots

The truck unloading automation provider Pickle Robot Co. today said it has raised $50 million in venture capital and will use the money to accelerate the development of new feature sets and build out the company’s commercial teams to unlock new markets and geographies.

The “series B” funding round was financed by an unnamed “strategic customer” as well as Teradyne Robotics Ventures, Toyota Ventures, Ranpak, Third Kind Venture Capital, One Madison Group, Hyperplane, Catapult Ventures, and others.

Keep ReadingShow less
chart of trucking conditions

FTR: Trucking sector outlook is bright for a two-year horizon

The trucking freight market is still on course to rebound from a two-year recession despite stumbling in September, according to the latest assessment by transportation industry analysis group FTR.

Bloomington, Indiana-based FTR said its Trucking Conditions Index declined in September to -2.47 from -1.39 in August as weakness in the principal freight dynamics – freight rates, utilization, and volume – offset lower fuel costs and slightly less unfavorable financing costs.

Keep ReadingShow less
chart of robot use in factories by country

Global robot density in factories has doubled in 7 years

Global robot density in factories has doubled in seven years, according to the “World Robotics 2024 report,” presented by the International Federation of Robotics (IFR).

Specifically, the new global average robot density has reached a record 162 units per 10,000 employees in 2023, which is more than double the mark of 74 units measured seven years ago.

Keep ReadingShow less
person using AI at a laptop

Gartner: GenAI set to impact procurement processes

Progress in generative AI (GenAI) is poised to impact business procurement processes through advancements in three areas—agentic reasoning, multimodality, and AI agents—according to Gartner Inc.

Those functions will redefine how procurement operates and significantly impact the agendas of chief procurement officers (CPOs). And 72% of procurement leaders are already prioritizing the integration of GenAI into their strategies, thus highlighting the recognition of its potential to drive significant improvements in efficiency and effectiveness, Gartner found in a survey conducted in July, 2024, with 258 global respondents.

Keep ReadingShow less